rear skid plate

neubs27 · 07-03-2010, 09:11 PM

hi, i was wondering if a aftermarket banchee rear skid plate will fit on a 350 warrior. my local dealer has one for 20 bucks. if that will fit i will get that one. i dont remember what company that skid plate is from. thanks for reading and your input.

**xzpolskix** · 07-04-2010, 10:12 AM

You're not really into putting parts that are made specifically for warrior on it are ya?

neubs27 · 07-04-2010, 11:08 AM

i got some stuff thats just for the warrior. but i find good deals on stuff for other wheelers so i always wonder if that will work on my wheeler. i heard the banshee is pretty simuliar to the warrior. i looked online and looked at the pics both skid plates look the same. dont get me wrong i dont buy cheap stuff its parts that nobody wants or needs anymore. so they sell it really cheap.

Dirtjunkie85 · 07-05-2010, 01:41 PM

The mount holes and oil drain hole is different and won't work.

neubs27 · 07-05-2010, 08:44 PM

the rear skid plate. not the engine plate.

**Midwest Trail Rider** · 07-06-2010, 06:09 PM

I am almost sure that the shee and the warrior axle carrior setup is the same. The only thing I would be afraid of is clearing the disk.

neubs27 · 07-06-2010, 08:42 PM

ok. the guy at the dealership said i can see if it will fit before i buy it. thanks to all for the info.

**xzpolskix** · 07-06-2010, 08:54 PM

Let us know when you try it in case someone else will have the same question in the future

neubs27 · 07-07-2010, 11:34 AM

sure can do.

Dirtjunkie85 · 07-09-2010, 01:27 PM

Guess I should have read that better. My bad!

07-03-2010, 09:11 PM	#1
neubs27 Join Date: Jun 2010 Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	rear skid plate hi, i was wondering if a aftermarket banchee rear skid plate will fit on a 350 warrior. my local dealer has one for 20 bucks. if that will fit i will get that one. i dont remember what company that skid plate is from. thanks for reading and your input.

07-04-2010, 10:12 AM	#2
xzpolskix Banned Ride: '09 R1 Join Date: Jul 2009 Location: NW Chicago suburb Ride: '09 R1 Posts: 2,459 Thanks: 11 Thanked 82 Times in 76 Posts	You're not really into putting parts that are made specifically for warrior on it are ya? __________________ 09 R1 mods: Stocker than stock

07-06-2010, 08:54 PM	#8
xzpolskix Banned Ride: '09 R1 Join Date: Jul 2009 Location: NW Chicago suburb Ride: '09 R1 Posts: 2,459 Thanks: 11 Thanked 82 Times in 76 Posts	Let us know when you try it in case someone else will have the same question in the future __________________ 09 R1 mods: Stocker than stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2010, 11:08 AM	#3
neubs27 Join Date: Jun 2010 Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	i got some stuff thats just for the warrior. but i find good deals on stuff for other wheelers so i always wonder if that will work on my wheeler. i heard the banshee is pretty simuliar to the warrior. i looked online and looked at the pics both skid plates look the same. dont get me wrong i dont buy cheap stuff its parts that nobody wants or needs anymore. so they sell it really cheap.

07-05-2010, 01:41 PM	#4
Dirtjunkie85 Join Date: May 2010 Posts: 128 Thanks: 1 Thanked 0 Times in 0 Posts	The mount holes and oil drain hole is different and won't work.

07-05-2010, 08:44 PM	#5
neubs27 Join Date: Jun 2010 Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	the rear skid plate. not the engine plate.

07-06-2010, 08:42 PM	#7
neubs27 Join Date: Jun 2010 Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	ok. the guy at the dealership said i can see if it will fit before i buy it. thanks to all for the info.

07-07-2010, 11:34 AM	#9
neubs27 Join Date: Jun 2010 Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts	sure can do.

07-09-2010, 01:27 PM	#10
Dirtjunkie85 Join Date: May 2010 Posts: 128 Thanks: 1 Thanked 0 Times in 0 Posts	Guess I should have read that better. My bad!

Remove Advertisements Sponsored Links
YamahaForum.com Advertisement